background image

Making Audio Input/Output
Settings

Note

These settings are for adjusting the audio
handling.

"Echo Canceller" 

and 

"Auto Gain Control"

should normally be set to 

"ON"

. Changing

either of these settings to 

"OFF"

 may result in

degradation of the sound quality during a video
conference call.

"Output local site sound"

 should normally be

set to 

"OFF"

.

When a mic is connected, feedback may occur
if your voice is output through the TV speakers.
In places where a mic is used, do not have your
voice output through the speakers.

1.

Select 

"Audio I/O"

 and press 

[ENTER]

.

The audio input/output settings screen is
displayed.

2.

Use 

[

][

]

 to select the following items for input:

"Echo Canceller"

: Use 

[

][

]

 to select whether

to enable the echo canceller feature.

"ON"

 (default): Enables the echo canceller

feature.

"OFF"

: Disables the echo canceller feature.

"Auto Gain Control"

: Use 

[

][

]

 to select

whether to enable the auto gain control feature.

"ON"

 (default): Enables the auto gain control

feature.

"OFF"

: Disables the auto gain control feature.

Note

In order to set 

"Auto Gain Control"

, the

setting for 

"Echo Canceller"

 must be

"OFF"

.

"RCA input gain for Audio"

: Press 

[ENTER]

 and

use 

[

][

]

 to select the input gain for the Audio

In L/R jack (-42 dB to +4 dB) (default: -32 dB).

Note

The value set for 

"RCA input gain for

Audio"

 will be applied when 

"Auto Gain

Control"

 is set to 

"ON"

.

"Audio output terminal"

: Press 

[ENTER]

 and use

[

][

]

 to select audio output for during a video

conference call.

"HDMI1"

 (default): Outputs your own site’s

audio to HDMI1.

"HDMI2"

: Outputs your own site’s audio to

HDMI2.

"OFF"

: Your own site’s audio is not output to

HDMI.

Note

In the image output settings, when 

"Video

Output"

 is set to 

"HDMI 1"

"HDMI2"

 is not

displayed (Page 122).

"Output local site sound"

: Press 

[ENTER]

 and

use 

[

][

]

 to select whether your own site’s audio

is output to its destination during a video conference
call.

"OFF"

 (default): Local site audio is not output.

"RCA"

: Local site audio is output through the

the Audio Out L/R jack.

"HDMI"

: Local site audio will be output to the

HDMI connection set in 

"Audio output

terminal"

.

3.

Press 

[G]

.

A dialogue box to confirm the saving of settings
is displayed.

4.

Use 

[

][

]

 to select 

"Yes"

 and press 

[ENTER]

.

The administrator menu screen is displayed.

Making GUI Settings

1.

Select 

"GUI Settings"

 and press 

[ENTER]

.

The GUI settings screen is displayed.

2.

Use 

[

][

]

 to select the following items for input:

The following items are displayed over 2 pages.
To view all the items, press 

[R]

 to move to the

next page, and press 

[B]

 to move to the

previous page.

"Settings" Menu

: Use 

[

][

]

 to select

"ON"

 (default) or 

"OFF"

.

If you select 

"OFF"

, the settings screen is not

displayed even if you select 

"Settings"

 in the

menu screen.

"Select local site" Menu

: Use 

[

][

]

 to select

"ON"

 (default) or 

"OFF"

.

If you select 

"OFF"

, the select local site screen

is not displayed even if you select 

"Select local

site"

 in the menu screen.

"Network Settings" Menu

: Use 

[

][

]

 to select

"ON"

 (default) or 

"OFF"

.

124

User Manual

Document Version  2015-03  

Contacts and Settings

Содержание KX-VC1600SX

















































































































































































Отзывы: