Panasonic KX-TVP50E, Руководство по установке

Страница: 103 / 368

CUSTOMISING THE SYSTEM
Installation Manual 103
Enter the data using the following table as a guide.
Table 24
Description Value Range
(Default)
Description/Function
Dial Number Up to 32 Digits of
[1-9,0, ,#,P,T,M,X]
(None)
Assigns the telephone or beeper (pager) number to
Device 1, 2 and/or 3.
P: Pause
T: Dial Tone Detection
M: Dial Mode Switching Code (Touchtone to Pulse,
or Pulse to Touchtone)
X: Callback Number Entry Code
1-9, 0, , #: Dial Codes
The callback number entry code (X) must be entered
if COS is set to enable and set to beeper (pager).
Use backspace to delete your entry.
Type of
Device 1. Telephone
2. Beeper
(Telephone)
Assigns whether device is beeper (pager) or
telephone.
Use Mode
1. Not Use
2. Continuously
3. Scheduled
(Continuously)
Specifies how Device 1, 2, or 3 is to be used. The
subscriber can also specify the use mode from his
telephone.
1. Not Use—Device 1, 2, or 3 is not used for a
notification call.
2. Continuously—Device 1, 2, or 3 is called whenever
a message is recorded in the mailbox.
3. Scheduled—Device 1, 2, or 3 is called on a
schedule basis when a message has been left in the
mailbox.
No. of Retries 0-4 Times
(0)
Specifies the number of times a device should be
retried when busy or no-answer.
Busy Delay
Time 2-120 min
(3)
The time the VPS will wait before retry on busy.
No Answer
Delay Time 2-120 min
(30)
The time the VPS will wait before retry on No
Answer.