Panasonic KX-TVP50E, Руководство по установке

Страница: 51 / 368

INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
Installation Manual 51
units are connected to the KX-TA series, 2 different extension groups should be assigned
for each KX-TVP50 in System Program [600]. One extension group is for jack 07, or
jacks 07 and 08 of the KX-TA series. The other extension group is for jack 15, or jacks
15 and 16.
4.
Enable hunting for the VPS extension groups using System Program [100].
5.
Set the hunting type for the VPS extension groups to circular using System Program [101].
6.
At every VPS extension, temporarily connect an SLT or butt set, go off-hook and dial 7301#
to turn on Data Line Security. This prevents the KX-TA series from sending Executive
Override or Call Waiting tones to these extensions. We recommend that all Voice Mail port
extensions have this feature enabled to avoid interruption of recording.
7.
Select the appropriate exchange line feature settings depending on how your customer plans
to use the VPS: A) to answer all incoming calls, B) as an operator backup, or C) to only
answer calls not answered by user extensions.
Recommended exchange line feature settings:
a) If the KX-TVP50 is answering all incoming calls:
Exchange Line Mode
— Use System Programs [414](Day Mode), [415](Night
Mode), [416](Lunch Mode) to set this parameter. Program all lines DIL to the first
extension of the Voice Mail hunt group. The KX-TA series will allow incoming
outside calls to hunt only if the exchange lines are DIL to the first port of the hunt
group. Lines programmed as Normal do not hunt.
b)
If the KX-TVP50 is only answering calls not answered by the operator (Operator
Backup):
Flexible Ringing Assignment — For each applicable exchange line, use System
Programs [408](Day Mode), [409](Night Mode) and [410](Lunch Mode) to enable
ringing at the operator's extension(jack).
Delayed Ringing Assignment — To give the operator time to answer the call before
the VPS picks up, we recommend setting the delay to a few seconds for each
extension connected to the KX-TVP50. Use System Programs [411](Day Mode),
[412](Night Mode) and [413](Lunch Mode).
Exchange Line Mode
— Set the mode for each applicable exchange line to Normal.
Use System Programs [414 ](Day Mode), [415](Night Mode) and [416](Lunch
Mode) to set this parameter.
c)
If the KX-TVP50 is only answering calls not answered by user extensions:
Flexible Ringing Assignment — For each applicable exchange line, use System
Programs [408](Day Mode), [409](Night Mode) and [410](Lunch Mode) to enable
ringing on every extension (jack) that you want to have ring.
Delayed Ringing Assignment — To give users time to answer the call before the
VPS picks up, we recommend setting the delay to a few seconds for each extension
connected to the KX-TVP50. Use System Programs [411](Day Mode), [412](Night