Panasonic KX-TVP50E, Руководство по установке

Страница: 146 / 368

SYSTEM MAINTENANCE AND TROUBLESHOOTING
146 Installation Manual
Line disconnection occurs
while transferring an outside
call.
Unable to transfer an outside
call.
• Improper setting of the
sequence.
• Improper setting of the
hooking time.
• Improper setting of the CPC
signal.
• Adjust the transfer sequence to
that of the connected PBX and
reset (see "Operator Transfer
Sequence" and "Extension
Transfer Sequence" in Table 72
in B7.3
PBX Interface
Parameters).
• Adjust the hooking time to that
of the connected PBX and reset
(see "Flash Time" in Table 68 in
B7.2
Port Setting).
• Adjust the CPC signal to that of
the connected PBX and reset
(see "CPC Signal" in Table 68
in B7.2
Port Setting).
Unable to call an outside
party. • Improper setting of the outside
call dial procedure. • Reset the outside (CO) line
access sequence of the
connected PBX (see "Dial
Number" in Table 36 in
B2
SYSTEM
ADMINISTRATION -
MAILBOXES and "Number of
Digits to Access Outside Line"
in Table 59 in B6.7
Other
Parameters).
• Also check "Outgoing Call
Setup Sequence" in Table 59 in
B6.7
Other Parameters.
Unable to call an extension.
• Improper setting of extension
numbering plan. • Adjust the extension numbering
plan properly (see "Numbering
Plan 1-16" in Table 58 in
B6.7
Other Parameters).
Unable to access the mailbox. • Improper setting of the
mailbox number. • Re-adjust the number of digits
in the mailbox number (see
"Mailbox Number" in Table 34
in B2
SYSTEM
ADMINISTRATION -
MAILBOXES).
Table 30
PROBLEM PROBABLE CAUSE POSSIBLE SOLUTION