Panasonic KX-TVP50E, Руководство по установке

Страница: 284 / 368

MESSAGE MANAGER'S GUIDE
284 Installation Manual
4.
Type
the
device number (1-3)
.
Note
If a telephone number has not been assigned to the selected device number, you
cannot set the device status. See "Assigning Notification Numbers" to assign a
telephone number
.
5.
Press [1], [2], or [3]
to select the device status.
• [1] Schedule (enabled on the schedule)
• [2] Continuously (enabled whole day)
• [3] Not Use (disabled whole day)
Assigning Notification Numbers
Up to 3 telephone or beeper (pager) numbers can be set for message notification. The 0 to 9
keys, the tone/pulse switch, and the beeper (pager) Callback Number Display Entry Code [X]
are used to make these assignments.
When the Beeper Callback No. Entry Code is added at the end of a beeper (pager) number, the
notification is made in a different way. The VPS will ask the caller to enter the number to be
called and will display this number on the beeper (pager). The setting of the Callback Number
Entry can be set to before the message, after the message, or with no message depending on
System Programming.
It is also possible to have the caller select whether or not enter a callback number. The System
Manager must authorise the use of Beeper Callback No. Entry Code.
1.
Log in
the Main Menu.
2.
Press [2] to set Message Waiting Notification
3.
Press [3] to assign Telephone Number.
4.
Press [1]
to change the first telephone number,
[2]
to change the second telephone number,
or
[3]
to change the third telephone number.
5.
Press [1] to set the telephone number.
6.
Type
the
telephone number
.
7.
Press [2]
to accept the entry.
• [1] Change the telephone number
• [2] Accept