Panasonic KX-TVP50E, Руководство по установке

Страница: 57 / 368

INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX
Installation Manual 57
From the SYS-PGM NO ? screen:
a)
Enter [130] (for VPS1) or [131] (for VPS2).
b)
Press the NEXT button (SP-PHONE).
Screen output: Disable
c)
Press the SELECT button (AUTO-ANSWER).
Screen output: Port 7 or Port 15
d)
To assign 2 jacks, Press the SELECT button (AUTO-ANSWER) again.
Screen output: Port 7& 8 or Port 15& 16
To assign 1 jack, skip this step.
e)
Press STORE.
f)
Press END
(HOLD).
5.
Select the appropriate exchange line feature settings depending on how your customer plans
to use the VPS: A) to answer all incoming calls, B) as an operator backup, or C) to only
answer calls not answered by user extensions.
Recommended exchange line feature settings:
Conditions: The lowest jack (jack 07 or jack 15) entered here must
be connected to Port 1 of the VPS.
To change the current assignment from "Port 7" to
"Port 7 & 8", you must first change it to "Disable".
Likewise, if you want to change it from "Port 7 & 8" to
"Port 7", you must first change it to "Disable". If the
current assignment is already "Disable", you can make
a change in 1 step. This condition also applies to System
Program [131].
When "Port 7 & 8" is selected in program [130],
extension jack numbers 07 and 08 will be in extension
group 7 automatically. Likewise, when "Port 15 & 16"
is selected in program [131], extension jack numbers 15
and 16 will be in extension group 8 automatically. Also
the Extension Hunting type is set as "Circular"
automatically in each of these 2 extension groups.
Extension
group 8
KX-TA series
15
16
Port 1
Port 2
KX-TVP50 (VPS2)
7
8
Port 1
Port 2
KX-TVP50 (VPS1)
Extension
group 7