Panasonic KX-TG2361JX Скачать руководство пользователя страница 59

Страница: 59 / 80

Ans

ering System

Listening to Messages

Using the Base Unit

You can see the total number of recorded messages on the base unit display. If the
NEW MESSAGE indicator flashes on the base unit, new messages have been
recorded.
• If the Message Alert is turned on (p. 24), the Ringer/Message Alert indicator on

the handset will flash slowly when new messages have been recorded and the
handset is not in use.

To play back messages

Press

[MESSAGE]

• The unit announces the number of new

messages and only new messages are played
back.

• When you have no new messages, the unit

announces “

No new messages. All message

playback

” and plays back all messages.

• When you have no messages, the unit

announces “

No messages

”.

• During playback, the display shows the message number.
• At the end of the last message, “

End of final message

” is heard. The unit will

announce the remaining recording time if it is less than 3 minutes.

• If a call is received during playback, the unit rings and playback stops. To answer

the call, press

[SP-PHONE]

. For playback, start again from the beginning after

hanging up.

Voice Day/Time Stamp:

During playback, the unit will announce the day and

time when each message was recorded (p. 14).

Base Unit

[MESSAGE]

NEW MESSAGE Indicator

TG2361JX.book 59 ページ２００９年１２月１７日　木曜日　午前１１時５５分

Содержание KX-TG2361JX

















































































Результаты поиска

Содержание KX-TG2361JX

Отзывы:

Похожие инструкции для KX-TG2361JX

Бренды по названию

Популярные бренды

Panasonic KX-TG2361JX, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2361JX

Отзывы:

Похожие инструкции для KX-TG2361JX

Бренды по названию

Популярные бренды