Panasonic KX-TG2361JX Скачать руководство пользователя страница 65

Страница: 65 / 80

Remote Operation from a Touch Tone Phone

Ans

ering System

Voice Menu

The shaded parts are voice prompts.

• 3 seconds after playback, the voice menu will start again from the beginning.
• The unit will announce the remaining recording time after playback if it is less than

3 minutes.

• If you hear “

Memory full

” after playback, erase unnecessary messages (p. 66).

• If you do not press any buttons within 10 seconds after a voice prompt, “

Thank you

for your call.

” will be heard and the call will be disconnected.

Press 1 to play back new messages.

Press 2 for other functions.

Press 1 to record your message.

Press 2 for other functions.

Press 1 to erase all messages.

Press 2 for other functions.

Press 1 to record your greeting.

Press 2 for other functions.

Press 1 to play back all messages.

Press 2 for other functions.

Press

[2]

Press

[2]

Press

[2]

Press

[2]

Press

[2]

Press

[1]

Press

[1]

Press

[1]

Press

[1]

Press

[1]

A long beep sounds and “

messages

” is heard and all

recorded messages are erased.

Please leave your message.

1. Talk after the long beep.
2. When you finish recording a

memo message, hang up.

Press 7 to record your greeting.
Press 9 to end recording.

1. Press

[7]

2. After the long beep, talk for

up to 2 minutes.

3. Press

[9]

to finish.

• Your greeting will be played

back for confirmation.

New Message Playback.

Only new messages are played
back. At the end of the last
message, “

End of final message

”

is heard.

All Message Playback.

All recorded messages are
played back. At the end of the
last message, “

End of final

message

” is heard.

TG2361JX.book 65 ページ２００９年１２月１７日　木曜日　午前１１時５５分

Содержание KX-TG2361JX

















































































Результаты поиска

Содержание KX-TG2361JX

Отзывы:

Похожие инструкции для KX-TG2361JX

Бренды по названию

Популярные бренды

Panasonic KX-TG2361JX, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2361JX

Отзывы:

Похожие инструкции для KX-TG2361JX

Бренды по названию

Популярные бренды