Panasonic KX-TG2361JX Скачать руководство пользователя страница 66

Страница: 66 / 80

Remote Operation from a Touch Tone Phone

Direct Remote Operation

Once you have entered the remote code, you can also control your unit by direct
commands instead of using the voice menu. To end remote operation, hang up at
anytime.

Direct commands

To turn on the Answering System:

Call your unit and wait for 15 rings.

• The unit will answer and the greeting will be played.
• The Answering System will be turned on. Hang up or enter the remote code for

other options.

• When turning on the Answering System using a rotary or pulse service telephone,

you cannot enter the remote code for other options.

Skipping the greeting

After calling your unit, press

[

]

during the greeting.

• The unit skips the rest of the greeting and you can start recording your message

after the long beep.

[4] :

Plays back new
messages.

[5] :

Plays back all
messages.

[1] :

Repeats the current
message.

• If pressed within the first

5 seconds of playback,
the previous message
will be played.

[2] :

Skips the current
message.

[9] :

Stops the current
operation.

• To resume, enter a direct

command within
15 seconds, or the voice
menu will start (p. 65).

[7] :

Records a greeting
message.

After the long beep, talk for
up to 2 minutes.
Recording is stopped.
• The greeting is played.

[

] [4] :

Erases the current
message.

• A short beep will sound

and the next message
will be played.

[

] [5] :

Erases all messages.

• A long beep will sound

and “

No messages

” will be

heard.

[0] :

Turns off the Answering
System.

• The unit hangs up.

[9]

TG2361JX.book 66 ページ２００９年１２月１７日　木曜日　午前１１時５５分

Содержание KX-TG2361JX

















































































Результаты поиска

Содержание KX-TG2361JX

Отзывы:

Похожие инструкции для KX-TG2361JX

Бренды по названию

Популярные бренды

Panasonic KX-TG2361JX, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2361JX

Отзывы:

Похожие инструкции для KX-TG2361JX

Бренды по названию

Популярные бренды