Panasonic KX-TG2361JX Скачать руководство пользователя страница 72

Страница: 72 / 80

If the Following Appears on Your Display...

The following will be displayed when the unit needs your attention.

Display message

Cause & Remedy

Recharge battery

• The battery needs to be charged. Recharge the

battery (p. 10).

Charge for 6h

• The battery has been discharged. The handset will

not work. Fully charge the battery (p. 10).

No link to base.
Move closer to
base, try again.

• The handset has lost communication with the base

unit. Walk closer to the base unit and try again or re-
register the handset (p. 56).

• Confirm the base unit’s AC adaptor is plugged in.
• Raise the base unit antenna.

Please lift up
and try again.

• A handset button was pressed while the handset

was on the base unit or charger. Lift the handset and
press the button again.

Busy

• The base unit and/or another handset is in use. Try

again later.

• The handset you tried to send phone book items to

is in use. Try again later.

• The handset you are calling is too far from the base

unit.

• Another handset is in programming mode. Try again

later.

Error!!

• When you tried to re-register the handset, the

handset and base unit could not link for some
reason, such as interference from electrical
appliances. Move the handset and base unit away
from any electrical appliances and try again.

• Another handset tried to send phone book items to

you but the copying stopped (p. 43, 44).

Phone book full

• When you tried to store an item in the phone book,

the phone book memory was full. Press

[OFF]

to exit

the programming mode. To erase other items from
the phone book, see page 42.

System is busy.
Please try again
later.

• The handset has lost communication with the base

unit. Walk closer to the base unit and try again.

• The Answering System is in use, such as answering

a call or playing back messages. Try again later.

• Another handset is in programming mode. Try again

later.

TG2361JX.book 72 ページ２００９年１２月１７日　木曜日　午前１１時５５分

Содержание KX-TG2361JX

















































































Результаты поиска

Содержание KX-TG2361JX

Отзывы:

Похожие инструкции для KX-TG2361JX

Бренды по названию

Популярные бренды

Panasonic KX-TG2361JX, Руководство по эксплуатации

Результаты поиска

Содержание KX-TG2361JX

Отзывы:

Похожие инструкции для KX-TG2361JX

Бренды по названию

Популярные бренды