Panasonic KX-NS500, Руководство по функциям

Страница: 492 / 580

Making a call from a PS requires a certain number of DSP resources, depending on the codec used. If all
DSP resources are in use, this operation cannot be performed. To ensure a minimum level of performance,
DSP resources can be reserved for VoIP communication. (
®
5.5.4 DSP Resource Usage)
[S-PS Broadcast Call]
Note
For the following conditions, "ICD group" refers to an ICD group that is configured to distribute calls to
SIP-CSs. These conditions do not necessarily apply to ICD groups in general.
•
It is possible to specify extensions other than SIP-CSs as ICD group members.
•
If there is an incoming call at an ICD group and a new incoming call arrives at the same ICD group, the
new call will be placed in the group’s queue. (
®
2.2.2.4 Queuing Feature)
•
If there are several incoming calls, up to 1 call can be queued at the SIP-CS.
•
If an S-PS is receiving an incoming broadcast call but then receives an individual call (a call directly to its
extension number), the individual call will be given precedence.
•
If an S-PS is receiving an incoming broadcast call but then receives a group call from an ICD group of
which the S-PS is a member, the group call will be given precedence.
•
A supervisor extension in the ICD group can control the log-in/log-out status of a SIP-CS in the group.
However, a SIP-CS cannot change its own log-in/log-out status. (
®
2.2.2.9 Supervisory Feature,
®
2.2.2.8 Log-in/Log-out)
•
Automatic Log-out does not apply to SIP-CSs. (
®
2.2.2.8 Log-in/Log-out)
•
A supervisor extension in the ICD group cannot control the wrap-up status of a SIP-CS in the group, nor
can a SIP-CS change its own wrap-up status.
•
A Wrap-up button configured on an S-PS controls the PS’s wrap-up status. It cannot be used to control a
SIP-CS’s wrap-up status.
PC Programming Manual References
7.12 Utility—CS-Web Connection
9.20 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-UTEXT—KX-UT Series SIP Phone,
S-PS, and SIP-CS Registration and De-registration
9.20 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-UTEXT—Main—
Telephone Type
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main— Telephone
Type
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
Feature Guide References
2.2.2 Incoming Call Distribution Group Features
492 Feature Guide
5.2.2 SIP (Session Initiation Protocol) Extension