Panasonic KX-NS500, Руководство по функциям

Страница: 489 / 580

Button Usage
Call Park
Place the current call into a parking zone of the PBX. (
®
2.13.2 Call
Park) There are two modes:
•
Specific: Place the call into the specified park zone.
•
Automatic: The telephone searches for an idle park zone from among
those assigned to its own flexible buttons.
*1 This feature is not controlled from the PBX.
*2 Not available on all KX-UT series SIP phones.
Conditions
•
Requirement:
A V-UTEXT card is required to use a KX-UT series SIP phone.
•
Changes made locally to entries downloaded from the PBX are not applied to the phonebook entries on
the PBX.
•
Only entries in the PBX directories that have phone numbers assigned will be downloaded.
•
On KX-UT248 and KX-UT670 phones, the labels displayed on flexible buttons can be customised through
system programming.
®
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button— Label Name
•
Incoming/Outgoing call log information is stored on the phone, not on the PBX.
•
For detailed explanations about a particular KX-UT series SIP phone, refer to the telephone’s
documentation.
•
DSP Resource Usage
Making a call from a SIP extension requires a certain number of DSP resources, depending on the codec
used. If all DSP resources are in use, this operation cannot be performed. To ensure a minimum level of
performance, DSP resources can be reserved for VoIP communication. (
®
5.5.4 DSP Resource Usage)
However, DSP resources are not required for P2P calls. (
®
5.2.3 Peer-to-Peer (P2P) Connection)
•
Phonebook integration
Up to 100 entries can be stored in the phonebook of the KX-UT113.
Installation Manual References
4.4 Virtual Cards
PC Programming Manual References
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main—Main— System Speed Dial
Download For UT Extensions
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site—Main—
IP Terminal
Registration Mode
9.19 PBX Configuration—[1-1] Configuration—Slot—Card Property—V-UTEXT
9.20 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-UTEXT
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
Feature Guide 489
5.2.2 SIP (Session Initiation Protocol) Extension