Panasonic KX-NS1000, Руководство по установке

Страница: 78 / 416

3.1 Information about the Activation Keys
Activation keys are required to use IP trunks and IP telephones on a private IP network with a KX-NS1000.
Also, to upgrade the software to use enhanced features, the corresponding activation keys for that feature are
required. Some activation keys are provided by default, some are provided free for a limited period, and others
are provided separately as activation key files.
Notice
When stacking PBXs to a KX-NS1000, the activation keys that were used with the PBXs cannot be used
with the KX-NS1000.
3.1.1 Type and Maximum Number of Activation Keys
The PBX supports the following type and number of activation keys. The preinstalled activation keys on the
mother board are shown with "[ ]".
When the number of preinstalled activation keys is not enough for the desired configuration or when you wish
to use enhanced features, additional activation keys in the form of activation key files can be installed using
Web Maintenance Console.
When the PBX is connected in a One-look network, activation keys should be installed on the appropriate PBX
as shown in the tables below.
Note
•
Store the downloaded activation key files in your PC or a memory device. They can then be reinstalled
when changing the Storage Memory Card or in an emergency situation.
•
For information about how to obtain the additional activation keys, refer to "3.1.2 Activation Key Code
and Key Management System".
•
For information about how to install the activation key files using Web Maintenance Console, refer to
"5.4.4 Installing Additional Activation Keys".
One-look Network for Slave Units
Note
•
In a One-look network, the activation key KX-NSF990 is available only for KX-NS300 PBXs.
•
In a One-look network, the activation key KX-NSF991 is available only for KX-NS700 PBXs.
Model No. Activation Key Type Description Maximum Activation Keys
KX-NSF990 VoIP/UM feature Allows the use of VoIP/Unified
Message (UM) feature.
1 activation key per slave unit
KX-NSF991 Expansion Capacity Allows to connect up to 3
Expansion Units to expand IP
capacity.
1 activation key per slave unit
78 Installation Manual
3.1.1 Type and Maximum Number of Activation Keys