Panasonic KX-NS1000 Скачать руководство пользователя страница 311

Страница: 311 / 416

Results of creating mailboxes

The results of creating mailboxes are recorded in a text file. Follow the procedure below to view the file.

When automatic configuration completes, click OK on the "Mailbox create result" dialogue box.

Mailbox_result.txt is saved to the local PC.

The meaning of the status in the generated file is as follows:

User Profile Status

Description

Exist

The user profile already existed and was assigned to the related mailbox and
extension number.

Skipped

The user profile was already assigned to the related mailbox and extension
number.

Mailbox Status

Description

Created

The new mailbox was successfully created.

Failed

The new mailbox was not created.

Assigned

The mailbox already existed, but was successfully assigned to the related
extension number.

Exist

The mailbox was already assigned to the related extension number.

Skipped

The mailbox already existed, but assigning it to the related extension number
failed.

The start and finish times of the automatic configuration is recorded in the syslog (INFO). For details, refer
to "7.3.2 Utility—Log—Syslog" in the PC Programming Manual.

Installation Manual

311

5.12 Automatic Configuration of Mailboxes

Содержание KX-NS1000

































































































































































































































































































































































































































Результаты поиска

Содержание KX-NS1000

Отзывы:

Panasonic KX-NS1000, Руководство по установке, Страница: 311 / 416

Результаты поиска

Содержание KX-NS1000

Отзывы: