manualshive.com logo in svg

Panasonic KX-NS1000, Руководство по установке, Страница: 346 / 416

Поделиться
Скачать
Panasonic KX-NS1000 Скачать руководство пользователя страница 346

8.1.9   Network Time Protocol (NTP)

The KX-NS1000 can be configured to contact an NTP server to receive and update its time setting
automatically.
KX-UT series SIP phones can receive and update their time setting either through the KX-NS1000 or by
contacting an NTP server directly.

For a SIP phone to receive and update its time setting via the KX-NS1000, the NTP server feature must be
enabled. To enable this feature refer to "28.2.4  Network Service—[2-5] Server Feature—NTP" in the PC
Programming Manual.

If the NTP server feature is enabled:

•

Case 1: An NTP server is specified in Web Maintenance Console.

–

The SIP phones use the specified IP address and contact the NTP server directly.

•

Case 2: An NTP server is 

not

 specified in Web Maintenance Console.

–

The SIP phones use the IP address of the KX-NS1000 as their NTP server.
(The KX-NS1000 acts as an NTP server for the SIP phones.)

To specify the IP address of the NTP server, refer to "10.1.2  PBX Configuration—[2-1-2] System—Date &
Time—SNTP / Daylight Saving" in the PC Programming Manual.

If the NTP server feature is disabled, the SIP phones use their own time settings.

346

Installation Manual

8.1.9 Network Time Protocol (NTP)

Содержание KX-NS1000

































































































































































































































































































































































































































Отзывы:

Нет отзывов