that any item will work correctly in all respects with another item of Telepermitted equipment of a different
make or model, nor does it imply that any product is compatible with all of Telecom's network services.
•
This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for
which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances.
•
Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the
equipment (PBX) associated with this modem. In order to operate within the limits for compliance with
Telecom's Specifications, the associated PBX equipment shall be set to ensure that modem calls are
answered between 3 and 30 seconds of receipt of ringing.
•
Using the toll services of a company other than Telecom:
If the PBX is set up to use the toll services of a company other than Telecom, the telephone numbers
dialled from the Caller Display listings within the PBX will be directed through the toll services of the other
company because the telephone numbers include the toll access digit and area code digit. A toll charge
may be incurred. Please check with the toll carrier concerned.
•
APPLICABLE ONLY TO TELECOM CUSTOMERS WHO HAVE AUTOMATIC ACCESS TO OTHER
CARRIERS FOR TOLL CALLS
When calling back a number from the Caller ID list, all numbers prefixed with "0 + AREA CODE" will be
automatically forwarded to your toll carrier. This includes numbers in your local calling area. The zero +
area code should either be removed when calling back local numbers, or check with your toll carrier that
a charge will not be levied.
•
All persons using this device for recording telephone conversations shall comply with New Zealand law.
This requires that at least one party to the conversation is to be aware that it is being recorded. In addition,
the principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the
personal information collected, the purpose for its collection, how it is used, and what is disclosed to any
other party.
For users in Australia only
•
No External TRC Terminal is provided due to an Internal Link between PE and TRC.
For users in Taiwan only
•
Lithium batteries can be found in the circuit boards of the main board and optional cards of the PBX.
Notice
Regarding removing or replacing a battery in the circuit board, consult your dealer.
Note
•
When disposing of any of the above products, all batteries must be removed. Follow the applicable
laws, regulations, and guidelines in your country/area regarding disposal of batteries.
•
When replacing a battery, use only the same battery type, or an equivalent recommended by the battery
manufacturer.
Installation Manual
13
Precaution
Содержание KX-NCP1000
