Panasonic KT4R Скачать руководство пользователя страница 2

Страница: 2 / 131

Preface

Thank you for purchasing the

Temperature controllers KT4R / KT8R / KT9R. This User’s Manual

contains instructions for mounting, functions, operations and notes when operating the KT4R, KT8R, KT9R. To

prevent accidents arising from the misuse of this controller, please ensure the operator receives this manual.

Abbreviations used in this manual

Abbreviation

Term

Process variable

Desired value

Manipulated variable

Deviation

OUT1

Control output OUT1

OUT2

Control output OUT2

Auto-tuning

Characters used in this manual

Indication

Number,

-1

Indication

Alphabet

Indication

Alphabet

Notes

• This instrument should be used in accordance with the specifications described in the manual.

If it is not used according to the specifications, it may malfunction or cause a fire.

• Be sure to follow the warnings, cautions and notices. If they are not observed, serious injury or malfunction

may occur.

• The contents of this instruction manual are subject to change without notice.

• Care has been taken to ensure that the contents of this instruction manual are correct, but if there are any

doubts, mistakes or questions, please inform our company.

• Measures must be taken to ensure that the operator cannot touch power terminals or other high voltage

sections.

• Any unauthorized transfer or copying of this document, in part or in whole, is prohibited.

•

Panasonic Industrial Devices SUNX Co., Ltd.

is not liable for any damage or secondary damage(s)

incurred as a result of using this product, including any indirect damage.

Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]

Содержание KT4R




































































































































Результаты поиска

Содержание KT4R

Отзывы:

Panasonic KT4R, Руководство пользователя, Страница: 2 / 131

Результаты поиска

Содержание KT4R

Отзывы: