70
70
71
Change the AUX name [Alarm]
Click the [Alarm] tab on the "Alarm" page. (
☞
Pages 24 and 25: How to display/operate the setup menu)
The names of "AUX", "Open" and "Close" on the "Live" page can be changed.
■
AUX title
[AUX (Up to 10 characters)]
Enter the name for "AUX" on the "Live" page.
Default:
AUX
[Open (Up to 5 characters)]
Enter the name for "Open" of "AUX" on the "Live" page.
Default:
Open
[Close (Up to 5 characters)]
Enter the name for "Close" of "AUX" on the "Live"
page.
Default:
Close
Note:
• AUX is a camera terminal that allows users to oper
-
ate (Open/Close) arbitrarily from the "Live" page.
For example, an operator can remotely control lights
in a place where the camera is installed by connect-
ing the terminal to the light controller.
Configure the VMD settings [VMD area]
Click the [VMD area] tab on the "Alarm" page. (
☞
Pages 24 and 25: How to display/operate the setup menu)
The video motion detection areas can be set on this page.
Up to 4 areas can be set. When motion is detected in the set area, it will be regarded as an alarm.
Important:
• The alarm occurrence indication button (
☞
page 9) will be displayed when motion is detected by the VMD func-
tion.
• The alarm occurrence indication button will be displayed when receiving an alarm input of a terminal alarm or a
command alarm.
• Depending on the network environment, notification may be delayed even when "Real time" is selected for
"Alarm status update mode" on the [Basic] tab of the "Basic" page (
☞
page 29).
• The motion detection function is not the dedicated function to prevent thefts, fires, etc. We are not responsible
for any accidents or damages occurring in case.
