62
62
63
[VIQS(H.264(1))]
Select "On" or "Off" to determine whether or not to
activate the VIQS function for the transmitted (H.264(1))
images.
Default:
Off
[VIQS(H.264(2))]
Select "On" or "Off" to determine whether or not to
activate the VIQS function for the transmitted (H.264(2))
images.
Default:
Off
Important:
• When the VIQS setting is activated and the setting
value for "Aspect ratio" is changed from "4:3" to
"16:9" on the [JPEG/H.264] tab, make sure that the
VIQS setting value does not exceed the maximum
designated range.
Note:
• Refer to the following for setting procedure of the
VIQS area.
Configure the VIQS area
The VIQS area is specified by following the steps below.
Step 1
Drag the mouse on the screen to specify the area.
→
The specified area is displayed with a white frame.
Note:
A selectable area is limited.
Step 2
S
elect [On]/[Off] to activate/disactivate a distributed
image of [VIQS (H.264 (1))] or [VIQS (H.264 (2))].
Step 3
Click the [Set] button.
→
This unit is updated wtih the setting contents. To
delete the specified area, click the [Delete] button.
Important:
• No setting contents are determined unless the [Set]
button is clicked.
•
To check the window after VIQS setting, display an
H.264 image on the "Live" page.
