10
10
11
!6
Snap shot button
Click this button to take a picture (a still picture).
The picture will be displayed on a newly opened
window. When right-clicking on the displayed
image, the pop-up menu will be displayed. It is pos
-
sible to save the image on the PC by selecting
"Save" from the displayed pop-up menu.
When "Print" is selected, printer output is enabled.
Note:
• For the case of using Windows 7 or Windows Vista,
the following settings may be required.
Open Internet Explorer, click [Tools] in the menu bar,
click [Internet Options], click the [Security] tab, click
[Trusted Sites], and click [Sites]. Register the cam
-
era address on "Website" of the displayed trusted
widows.
!7
Mic input button (*3)
Turns on/off the audio reception (hear audio from
the camera on a PC). This button will be displayed
only when "Mic input", "Interactive(Full-duplex)" or
"Interactive(Half-duplex)" is selected for "Audio
transmission/reception" on the setup menu.
(
☞
Page 63)
When this button is clicked, the button will turn into
the
button and audio from the camera will not
be heard.
Audio volume can be adjusted (Low/ Middle/ High)
by moving the volume cursor
.
!8
Audio output button (*3)
Turns on/off the audio transmission (play audio from
the PC on the unit speaker). This button will be dis
-
played only when "Audio output", "Interactive(Full-
duplex)" or "Interactive(Half-duplex)" is selected for
"Audio transmission/reception" on the setup menu.
(
☞
Page 63)
The button will blink during the audio transmission.
When this button is clicked, the button will turn into
the
button and audio from the PC will not be
heard.
Audio output volume can be adjusted (Low/Middle/
High) by moving the volume cursor
.
Note:
• When a user is using the audio transmission func
-
tion with "Interactive(Half-duplex)" selected, the
receiver button and the transmission button will be
inoperable for the other users.
When "Interactive(Full-duplex)" is selected, the
transmission button is inoperable for other users.
• Possible duration of audio transmission is up to 5
minutes per transmission. When 5 minutes have
passed, the audio transmission will automatically
stop. To turn the audio transmission function on,
click the [Audio output] button again.
• When the camera is restarted, the adjusted volume
level (for both the audio transmission and reception)
will return to the level that had been set on the
[Audio] tab on the setup menu. (
☞
Page 64)
• Actual volume level will change in three steps even
though the volume cursor can be adjusted minutely.
!9
SD recording status indicator
The status of the SD recording can be checked with
this indicator.
When the SD recording starts, the SD recording sta
-
tus indicator will light red. It will go off when the SD
recording stops.
This indicator will be displayed when "Manual" or
"Schedule" is selected for "Save trigger" on the
setup menu. (
☞
Page 32)
@0
Main area
Images from the camera will be displayed in this
area.
The current time and date will be displayed accord
-
ing to the settings configured for "Time display for
-
mat" and "Date/time display format". (
☞
Page 28)
*1 Only operable by users whose access level is
"1. Administrator".
*2 Only operable by users whose access level is
"1. Administrator" or "2. Camera control" when
"On" is selected for "User auth." (
☞
Page 77).
*3 Operable by users who belong to the access
level selected for "Permission level of audio
trans./recep." on the [Audio] tab of the "Image/
Audio" page. Refer to page 64 for the permis
-
sion level of audio.
Note:
• When operated by a lower access level user, images
displayed on the screen may be changed temporar
-
ily. This does not affect operation of the camera.
• Depending the PC in use, screen tearing* may occur
when the shooing scene drastically changes due to
the SDI restrictions of the OS.
* A phenomenon in which portions of the screen are
displayed out of alignment.