44
44
45
Configure the settings relating to images and
audio [Image/Audio]
The settings relating to JPEG, H.264 and MPEG-4 images such as the settings of image quality, audio, etc. can be
configured on this page.
The "Image/Audio" page has 4 tabs; the [JPEG/H.264] tab (or [JPEG/MPEG-4] tab), the [Image quality] tab and the
[Audio] tab.
Configure the settings relating to the aspect ratio [JPEG/H.264]
Click the [JPEG/H.264] tab on the "Image/Audio" page. (
☞
Pages 24 and 25: How to display/operate the setup
menu)
[Aspect ratio]
Select "4:3" or "16:9" for the aspect ratio.
Default:
4:3
Note:
• The other i-PRO series products do not support the
aspect ratio of "16:9" unless otherwise stated.
(As of October, 2010)
• Aspect ratio of 16:9 is unavailable for the MPEG-4
images.
• When selecting "16:9" for "Aspect ratio", "H.264" is
automatically set for "Video encoding format".
• Image adjustment functions are activated for the
angle of view in the aspect ratio of 4:3 even while
"16:9" is being selected for "Aspect ratio". When
setting the mask area for the back light compensa-
tion (BLC) function, it is recommended to configure
the setting after selecting "4:3" for "Aspect ratio".
• When "On" is selected for "VIQS" and the setting
value for "Aspect ratio" is changed from "4:3" to
"16:9", make sure that the VIQS setting value does
not exceed the maximum designated range.
■
JPEG
Configure the settings such as "Refresh interval
(JPEG)*", "Image capture size" and "Image quality" on
this section. Refer to page 47 and 51 for further infor-
mation about the settings relating to H.264 (or MPEG-4)
images.
"Live" page (Initial display)
Configure the settings relating to the JPEG images dis-
played on the "Live" page.
[Refresh interval (JPEG)*]
Select an interval to refresh the displayed JPEG image
from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/
6fps*/ 10fps*/ 12fps* (PAL only)/ 15fps*/ 30fps*
Default:
5fps
Note:
• When "On" is selected for "H.264 transmission" (or
"MPEG-4 transmission"), the refresh interval may be
longer than the set value when any value with an
asterisk (*) on the right is selected.
Configure the settings relating to JPEG images [JPEG/H.264]
(or [JPEG/MPEG-4])
Click the [JPEG/H.264] tab (or [JPEG/MPEG-4] tab) on the "Image/Audio" page. (
☞
Pages 24 and 25: How to dis
-
play/operate the setup menu)
