- 40 -
Performing a live broadcast
Press the Wi-Fi/WPS button continuously to change
the Wi-Fi mode lamp to [
].
≥
Wi-Fi mode lamp [
] will turn on when the connection is completed.
≥
A live broadcast starts.
≥
If [E-mail Setup] is enabled, a broadcast notification e-mail is sent to the
addresses that have been set.
∫
To stop a live broadcast
Press the Wi-Fi/WPS button, and turn off the Wi-Fi mode lamp.
≥
If recording is taking place on this unit during a live broadcast, the live broadcast cannot be
stopped. Stop the motion picture recording in advance.
∫
About live broadcast images
You can record live broadcast images by pressing the recording start/stop button.
≥
The Image App cannot be used connecting with this unit in Live broadcast mode. Access the URL
of the live broadcast to check the image.
∫
When the Wi-Fi mode lamp [
] is flashing fast (flashing at an
approximate interval of 0.5 second)
A live broadcast cannot be started.
≥
In the following cases, live broadcasting is not available.
j
When the recording mode is set to [1920
k
1080/60p] or [1280
k
720/60p]
j
When in [Slow motion mode]
j
While recording a motion picture
j
When in [Interval rec mode]
j
When the date setting is out of sync by a day or more
j
When two cameras simultaneously perform live broadcasts at the same account (The camera
that has started the broadcast first will be disconnected from the broadcast)
≥
When settings for live broadcasts are completed and [E-mail Setup
] in [
Live mode settings
] is
set, a live broadcast starts and a notification e-mail is sent to all registered e-mail
addresses each time the Wi-Fi mode lamp [
] lights up. When not sending, set to
OFF.
≥
When you cannot view and listen to a broadcast using the USTREAM application of a television
or a smartphone, the password of a distribution program is canceled. Please rebroadcast.
≥
If a live broadcast motion picture is saved on the “USTREAM” side, the file name will be the same
as the channel name.
≥
The live broadcast stops as the elapsed broadcast time exceeds 8 hours 30 minutes, and then it
starts again. (A separate file will be saved on the “USTREAM” side.)