- 11 -
Charging the battery
≥
This unit has a built-in rechargeable lithium-ion battery. Do not remove except when
disposing of this unit. (
l
61
)
≥
The battery will not be charged if this unit is turned on. Connect it with the PC to charge
the battery after turning it off.
≥
It is recommended to charge the battery in a temperature between 10
o
C and 30
o
C (50
o
F and 86
o
F).
A
: LOCK switch
B
: USB cable (supplied)
C
: Unlocked when the red indicator is visible
1
Slide
A
to the left to unlock the side cover and slide the side cover
downward to open it.
2
Connect the USB terminal of this unit to a PC with the USB cable
B
(supplied).
≥
Insert the USB cable securely all the way.
≥
The Power lamp will flash red at an interval of 2 seconds (approximately 1 second on, 1 second
off), indicating that charging has begun.
It will turn off when the charging is completed.
≥
Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥
Do not heat or expose to flame.
≥
Do not leave the unit (including built-in battery) in a car exposed to direct sunlight for a long
period of time with doors and windows closed.
≥
If operating time is short even after fully charging the battery, the battery is worn out and needs to
be replaced. Please contact your dealer.
≥
When the PC is in a power saving mode such as a standby state, the battery may not be charged.
Cancel the power saving mode, and connect this unit again.
≥
Operation is not guaranteed when devices are connected through USB hubs or by using
extension cables.
≥
Operation cannot be guaranteed on all devices having a USB terminal.
Power supply
When this unit is purchased, the battery is not charged. Charge the battery fully before
using this unit for the first time.
B
A
C
