- 36 -
Enter SSID (Wireless network name) and password of your access point to connect this unit to the
access point.
1
Check the SSID and password of your access point.
≥
The SSID and password of the access point (e.g. a wireless router) you use are described on the
access point device or in its manual. For details, refer to the access point manual.
2
Tap
#
[Camera Wi-Fi settings]
#
[Live mode settings]
#
[Set
connect. dest.] on the Image App screen and enter the SSID and
password of your access point (Step1).
3
Press the Wi-Fi/WPS button continuously to change
the Wi-Fi mode lamp to [
].
≥
The Wi-Fi mode lamp [
] flashes. (“1 Beep” sounds 8 times.)
≥
When “2 Beeps” sound 8 times, the connection is completed.
∫
About the connection destination in Live broadcast mode
You can register up to three SSIDs for live broadcasting (step 2)
When perfoming a live broadcast, a connection attempt will be made with the first SSID, and if it
fails, an attempt will be made with the second one, and so on.
≥
From [Live mode settings]
#
[Set connect. dest.], the following can be set.
j
Changing the priority order of the SSIDs for live broadcasting
j
Deleting connection destinations
≥
To disconnect from the access point, press the Wi-Fi/WPS button and turn off the Wi-Fi mode
lamp.
Entering SSID to connect to an access point
Preparation:
Connect this unit with the smartphone. (
l
17
)
