- 62 -
When disposing of your used products, delete
personal information from this unit by initializing
the network settings.
≥
Disassemble after the battery runs out.
≥
If it cannot be removed smoothly, contact
Panasonic’s Service Center.
≥
Keep disassembled parts out of reach of
children.
1
Open the side cover, and remove
all of the 6 screws indicated in the
figure below.
≥
Use a cross-slot screwdriver (commercially
available).
2
Remove the circuit board on the
front side (button side) of this unit,
and remove the flexible circuit
board
A
.
3
After pulling out the built-in battery
connector
B
, pull out the flexible
circuit board
C
, and pull out the
speaker connector
D
upwards.
4
Remove the 4 screws indicated in
the figure below, and remove the
heatsink
E
.
5
Remove the connector
F
of the
camera unit, and lift up the circuit
board.
6
Remove the battery by using a
screwdriver.
Regarding the handling of used batteries
≥
Insulate the terminals with cellophane tape or
similar.
≥
Do not disassemble.
How to remove the battery
This figure describes the disposal of this
unit, it is not instruction for repair. If
disassembled, repair is not possible.
