- 42 -
Enter SSID (Wireless network name) and password of your access point to connect this unit to the
access point.
1
Check the SSID and password of your access point.
≥
The SSID and password of the access point (e.g. a wireless broadband router) you use are
described on the access point device or in its manual. For details, refer to the access point
manual.
2
Tap
#
[Camera Wi-Fi settings]
#
[AP mode setup]
#
[Set
connect. dest.] on the Image App screen and enter the SSID and
password of your access point (Step1).
3
Press the Wi-Fi/WPS button continuously to change
the Wi-Fi mode lamp to [
].
≥
The Wi-Fi mode lamp [
] flashes.
≥
Wi-Fi mode lamp [
] will turn on when the connection is completed.
2
Connecting this unit and a device on the network
1
Connect a smartphone or a DLNA-compatible device to the access
point.
≥
Connect with an SSID connection or a WPS connection. For information on the connection
method, refer to the operating instructions for your device or access point.
2
When connecting to the smartphone
From the Image App, tap
#
[Set connect. dest.], and tap this
unit from the connection destination list.
≥
When the connection is complete, control this unit from the Image App.
When connecting with a DLNA-compatible device
On the DLNA device, select this unit from the list of devices that are
connected to the access point.
≥
Refer to the operating instructions of your DLNA-compatible device.
≥
Refer to page
43
for how to play back on a DLNA-compatible TV.
≥
An access point connection cannot be started during motion picture recording.
≥
If you remove the microSD card while this unit is in playback mode, Wi-Fi mode will turn off and
this unit will lose the connection to the access point.
≥
To disconnect from the access point, press the Wi-Fi/WPS button and turn off the Wi-Fi mode
lamp.
Entering SSID to connect to an access point
Preparation:
Connect this unit with the smartphone. (
l
17
)
