Panasonic HL-C2 Series, Руководство пользователя, Страница: 78 / 278

Chapter 4 Explanation of Functions
4-4
4
Cl
a
s
s
Function Details Initial value
Memory
change*1
Ref.
page
H
ea
d
S
et
ti
ng
Calibration
Measurement
value A
Corrects the measurement
value to the measurement
object’s color, material,
surface condition.
Upper measurement limit
(positive number)

4-19
Correct
value a Upper measurement limit
(positive number)
Measurement
value B Lower measurement limit
(negative number)
Correct
value b Lower measurement limit
(negative number)
Peak Recognition
Sensitivity
Sets the peak of the
received light waveform and
the recognition level.
100

4-21
Median Filter
Cut off sudden changes in
measurement values in order to
prevent variation in measurement.
OFF

4-22
O
U
T
S
e
tt
in
g
Output Selection
Selects whether measurement
is individually performed by
each sensor head or
performed by two sensor
heads with various calculation.
OUT1:A
OUT2:B

4-23
Transparent Object
Selects the measurement
surface from several surfaces
existed in the transparent object.
1
st
surface

4-25
Refractive
Index
calculation Reflects the refractive index,
which is set at “Refractive Index”,
to the measurement result.
OFF

4-27
Refractive
Index Sets the refractive index for
measuring transparent object.
1.000000

4-29
Zero Set
Forcibly sets the
measurement value to “0”.
OFF

4-31
Timing
Holds the measurement value
display of compact programmable
display and analog output.
OFF X 4-33
Reset Resets the measurement value. OFF X
4-34
Hold
Stops updating the
measurement value display.
OFF X
4-35
Analysis Mode Sets the analysis mode. Normal

4-36
Filter Operation
Selects the moving average,
low-pass, or high-pass.
Moving average

4-37 Average Times
Sets the average number of
times of moving average.
512 times

Cutoff frequency
Sets the cutoff frequency of
the low-pass/high-pass filter.
100Hz

Operation Coefficient
Sets the operation coefficient
for the measurement value.
1.000000

4-39
Offset
Adds/subtracts the offset value
to/from the measurement value.
0.00000mm

4-40
Judgm
ent
Output
Upper Limit value Sets upper/lower limit value
for judging the measurement
value.
Upper measurement limit
(positive value)

4-41
Lower Limit Value
Lower measurement limit
(negative value)
Upper Limit Hys. Stabilizes the judgment
output for chattering.
0.1% of the meas. range

4-43
Lower Limit Hys. 0.1% of the meas. range
Analog
Scaling
Meas. Val A
Performs scaling the analog
voltage output to any
desired value.
Upper meas. limit
(positive val.)

4-45
Voltage a +5[V]
Meas. Val B
Lower meas. limit
(positive val.)
Voltage b -5[V]
*1 Memory Change

: Maximum 16 settings can be saved by performing memory change.
X
: Settings can not be changed by performing memory change.