Panasonic HL-C2 Series Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 278

Panasonic HL-C2 Series Скачать руководство пользователя страница 9

Preface

7

Safety Precautions

This product is intended to detect the objects and does not have the control
function to ensure safety such as accident prevention.
Do not use the product as a sensing device to protect human body.
Please use the products that comply with local laws and standards for human
body protection specified by e.g., OSHA, ANSI and IEC.
Please read this manual carefully before using the product and use it
correctly.

● Install a fail-safe device when the product is used for the purpose that

has a possibility of physical injury or serious extended damage.

● Do not use the product in the atmosphere of flammable gas, to prevent

explosion.

● The product was developed and manufactured for industrial use.

● Use the product within specifications.

Abnormal heat or smoke generation may occur.

● Do not disassemble or remodel the product. Electrical shock or smoke

generation may occur.

● Connect the electric wire securely with the terminal screws.

Imperfect connection may cause abnormal heat or smoke generation.

● Do not touch the terminal during energization of the product, to prevent

electrical shock.

Cautions for handling CD-ROM

● Store the product away from direct sunlight, high temperature and high

humidity.

● Keep the both surfaces of CD-ROM free from fingerprints, dirt and

scratches.

● Protect the CD-ROM from liquids such as record cleaner, solvent, water

and oil.

● Do not use cracked, deformed or bonded disk.
● Keep the surfaces of CD-ROM free from writing letters, painting pictures

or putting stickers.

● Store the CD-ROM in the cover.
● Avoid putting something heavy onto the plastic cover. Do not drop it.

The cover may be damaged and injury may result.

● Do not play the CR-ROM in ordinary audio CD players, to prevent injury

of your ears or damage of the speaker.

«
...
7
8
9
10
11
...
»

Содержание HL-C2 Series























































































































































































































































































Отзывы:

Нет отзывов