Panasonic HL-C2 Series, Руководство пользователя, Страница: 156 / 278

Chapter 4 Explanation of Functions
4-82
4
■ Status Readout
This function checks the status of the measurement data accumulation.
Use this function for checking the accumulation status before reading the
accumulated data. After having checked the status, the controller replies one of the
next status.
Status Contents
Non-buffering
Buffering operation is not executed at all after turning on the power
supply or after initialization, or buffering operation is stopped while
waiting for trigger after buffering has started.
Wait for trigger Wait for trigger status after buffering operation has started.
Accumulating
Buffering operation has started and measurement data is being
accumulated, or trigger has being generated and measurement data is
being accumulated.
Accumulation
completed Accumulation amount has reached the setting value or the buffering
operation has stopped.
■ Final Data Point
The accumulation status can be read from the data amount.
“Final Data Point” is set to “0” when the “Status Readout” is set to “Non-
buffering”.
■Trigger Counter Readout
When the buffering mode is set to sample trigger mode, the number of
times of the final trigger generation can be read out.
When readout of the trigger counter is performed, stop the data accumulation
operation and confirm the “Final Data Point”. If the result of “Status
Readout” is indicated as accumulation completed and the “Final Data Point”
is any values other than “0”, readout of the trigger counter can be started.