Panasonic HL-C2 Series, Руководство пользователя, Страница: 119 / 278

Chapter 4 Explanation of Functions
4-45
4
■ Analog Scaling
This function executes scaling of the analog voltage output to a desired
value.
The system performs scaling of the analog voltage output to the desired value
within ±10V.
Fix two points of the desired voltages to “a” and “b” for each A and B of the
current voltage. Input the current measurement value as the value “A”, and input
the desired voltage as the value “a”. Also, set the value “B2 and “b” in the same
manner. Then, the analog voltage output can be scaled easily.
· The input range of both measurement value A and B is -950.000000 to
+950.000000[mm], and that of both voltage a and b is -10.000 to +10.000[V].
· The initial value of the measurement A is positive upper limit value of the
measurement range and that of the measurement B is negative lower limit value of
the measurement range, that of the voltage a is +5.000[V] ,and that of the voltage
b is -5.000[V].
· The display limit of the measurement value is ±950.000000mm. Make sure that
the setting value does not exceed the display limit.
· The analog current output interlocks the setting of the analog voltage output. (The
voltage and current cannot be set individually.) The default is set to 4mA at
-5.000[V], 20mA at +5.000[V].
“8-6 Characteristics” “Output
Characteristics and Measurement range Indicator”
· Check the input range of your input device such as AD board before setting.
● How to use
1
Display the “Analog Scaling” screen.
2
Touch the Change key.
The screen is changed.
Measurement range
Output
A
B
Meas val A
Voltage a

: Current voltage

: Originally intended voltage
a
b
Meas val B
Voltage b
Current voltage [V]
Voltage [V]
Selection screen of OUT1 Selection screen of OUT2