Panasonic HL-C2 Series Скачать руководство пользователя страница 142

Страница: 142 / 278

Chapter 4 Explanation of Functions

4-68

■ Save

This function saves the setting contents in all memories.

Be sure to “save” the setting change before turning off the system. Failure to do

deletes all setting change when the system is turned off.

When re-starting up the system, the last setting contents (saved at last) appear. If

all the settings are not saved, all of them are set to default value.

This function cannot save the status of “Timing Input” and “Hold” setting.

● How to use

Display the “Save” screen.

Touch the

Save All Memory

key.

The confirmation message appears.

Touch the

Yes

key.

The message of notifying the completion of save

appears.

*Touch the

key to cancel the save and

return to step 1.

Touch the

key.

Touch the

key to return to the “System

Menu 1/2”.

Содержание HL-C2 Series























































































































































































































































































Результаты поиска

Содержание HL-C2 Series

Отзывы:

Panasonic HL-C2 Series, Руководство пользователя, Страница: 142 / 278

Результаты поиска

Содержание HL-C2 Series

Отзывы: