Panasonic HL-C2 Series Скачать руководство пользователя страница 16

Страница: 16 / 278

Preface

Installation

■ Controller

・

Install the controller unit according to

“1-3 Installation Method”

, assuring

plenty of space around it. If it is installed in a manner other than specified,

failures may occur due to temperature rise.

・

If the controller is mounted internally on the place where air circulation is

blocked such as in a control board, the ambient temperature will rise due to

heat generated by the controller. In such case, forced cooling is required.

・

Vent holes for heat radiation are provided at the top and bottom of controller

unit. Provide adequate space for heat radiation, not to block the holes.

■ Wire Connections and Connectors

• Connect all wirings securely according to the explanations for I/O circuit

and description on the unit.

• Turn off the power of controller before connecting or disconnecting the

connectors.

• When connecting or disconnecting the connectors, be sure to hold the

connector area not to apply extra force to the cable.

• Be careful not to touch terminals or to let foreign objects get in the

connector after disconnecting connectors.

• Be careful not to apply force to around the connector of sensor head cable

and extension cable. Do not bend the cables near connectors, which causes

disconnection of the cable.

• When moving the sensor head during operation, install not to bend the cable

during movement. Use replaceable extensions cable where the cable needs

to be bent.

■ Cable Extension

• Do not pull the cable with a force

more than 29.4N when wiring the

cable when the sensor head and the

controller are fixed. At least 20

mm is required from the cable

connection to the bend. The

bending radius must be 30 mm or

more.

• Use only one extension cable for

connection between one sensor head

and a controller.

20mm or more

R30mm or more

Содержание HL-C2 Series























































































































































































































































































Результаты поиска

Содержание HL-C2 Series

Отзывы:

Panasonic HL-C2 Series, Руководство пользователя, Страница: 16 / 278

Результаты поиска

Содержание HL-C2 Series

Отзывы: