Panasonic HL-C2 Series, Руководство пользователя, Страница: 108 / 278

Chapter 4 Explanation of Functions
4-34
4
■ Reset
This function resets the measurement value.
The measurement value can be reset by touching the “Reset” button. When
executing the “Peak measurement”, “Bottom measurement”, or “Peak to Peak
measurement”, the measurement value that has been on hold can be reset at
the desired timing.
The measurement value display of compact programmable display is turned to
the data unfixed status by executing “Reset” function, and the fixed
value(-999.999999), the setting fixed value for analog output (default:
“-10.800[V]”), and the judgment output are all turned to “OFF”.
For the details, refer to
“Timing Chart” .
· The measurement value can be also reset by the reset terminal (RS1, RS2) of
the external input terminal.
“2-1 Functions and Arrangement of I/O Terminal Block”
When the reset input is set to “ON”, the “Judgment Output” is set to
“OFF”. This function is effective to perform judgment for each
measurement object at Peak, Bottom, and Peak to Peak measurements.
● How to use
1
Display the “OUT1 (or OUT2) operation” screen.
2
Touch the
Reset
key.
Touching the Reset key sets the temporary data
unfixed status, and the display value of compact
programmable display and analog output value are fixed.
* When the reset function is set to “ON”, the right screen appears temporarily,
and immediately after that, the left screen appears and the setting is released.
After the completion of reset, the measurement value is displayed after a
fixed duration passed.
Reset in progress Reset is completed.
Selection screen of OUT1 Selection screen of OUT2