Panasonic FP-XH M8N16PD Скачать руководство пользователя страница 215

Страница: 215 / 556

12.3 Start and Cancel of Synchronous Control

12-7



Operations while synchronous control is performed/canceled

Operation request axis

Operation while synchronous control

is performed

Operation while

synchronous control

is canceled

Master axis set

Slave axis set

Master/Slave axis set

Home return

No
The master axis performs

a home return.
The slave axes do not

perform a home return

but operate in

synchronization with

output from the master

axis.
For performing home

return, cancel the

synchronous control and

operate.

No
The slave axes do

not operate in

response to

operation requests.

Yes
The master axis or slave

axes will perform a home

return only if the master

axis or the slave axes are

so requested.

JOG operation

Yes
The slave axes operate

in synchronization with

the operation request of

the master axis.

Yes
The master axis or slave

axes will go into JOG

operation only if the

master axis or the slave

axes are so requested.

Positioning

Single axis

Interpolation

Yes
Interpolation will be

executed upon request if

the master axis is the

start axis of interpolation.
The slave axes operate

in synchronization with

the master axis.

Yes
Interpolation will be

executed upon request if

the requested axis is the

start axis of interpolation.

Stop

functions

System stop

All the axes come to a stop regardless of the synchronization settings.

Emergency

stop

Yes
The master axis comes

to a stop upon request.
The slave axes come to

a stop in synchronization

with the master axis.

Yes
Only axes

requested come to a

stop.
The master axis and

other salve axes set

on the same master

axis continue

operating.

Yes
Only axes requested

come to a stop.
(All the axes in

interpolation operation

come to a stop.)

Deceleration

stop

Limit stop

The master axis and all the slave axes come to a

stop.

Only axes resulting in a

limit error come to a stop.

Error stop

Only axes resulting in an

error come to a stop.

(Note 1): When an error occurs in the master axis and slave axes, all axes will stop at the stop time of tha master axis.
(Note 2): When a limit stop or error stop occurs in slave axes, the master axis will stop. Consequently all slave axes

will stop at the stop time of the master axis.

Содержание FP-XH M8N16PD













































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FP-XH M8N16PD

Отзывы:

Бренды по названию

Популярные бренды

Panasonic FP-XH M8N16PD, Руководство пользователя

Результаты поиска

Содержание FP-XH M8N16PD

Отзывы:

Бренды по названию

Популярные бренды