Panasonic FP-XH M8N16PD Скачать руководство пользователя страница 178

Страница: 178 / 556

Transfer to Unit and

Commissioning

10-20



Dialog box items

Item

Description

Related

Page

Synchronous

master axis

When set as the master axis, "Master" will be displayed.

When set as the slave axis, the master axis based on such axis will be

displayed. E.g.) When the axis 2 is set to be a slave following the axis 1 as

the master, "Axis 1" will be displayed in the line of Axis 2".

Axes not used for synchronized control will be displayed as [--------].

12.1

Synchronous

Control

Synchronized

output

Displays the synchronous running function set to the slave axis.

Gear, clutch, cam

Gear

＋

Clutch, Gear

＋

Cam, Clutch

＋

Cam

Gear

＋

Clutch

＋

Cam

Axes not used for master axis and synchronized control will be displayed as

[--------].

Synchronous

state

Displays the set status (synchronous/non-synchronous) of each axis.

Pressing the "Change synchronization" button switches the state between

Synchronous and Asynchronous.

Current value

Monitors the feedback values of the axes after unit conversion. Click the

[Current value update] button to display the value input dialog box, which

allows to update the current value.

17.5 Current

Value Update

Unit

Displays the unit of the command of each axis set in parameter settings.

JOG target

speed

Monitors and displays the target speed of JOG operation.

Click the [Change] button to change the target speed of JOG operation.

JOG [+]

Click the [+] button to execute JOG forward running.

JOG [-]

Click the [

−

] button to execute JOG backward running.

Table no.

Displays the table no. of teaching an press the [Teaching] button to change

the data table No. of teaching and register the current value.

9.4 Creating

Positioning

Data Table

Axis state

Displays the operation state of each axis.

"Operating" (green): The motor is running.

"Stopped" (gray): The motor stops.

"Error" (red): An error occurs.

Error code

The latest error code is displayed in case of an error.

If a recoverable error occurs in the control, click the [Clear errors] button to

clear the error.

19.3 Table of

Error Codes

Warning code

The latest warning code is displayed in case of a warning.

Click [Clear warning] to clear the warning.

19.4 Table of

Warning

Codes

Speed rate

It allows setting the target speed of home return of different axes set in

parameter settings as 100% to specify the speed multiplier operation. Click

the [Speed Rate] button to display the value input dialog box.

KEY POINTS

•

The control method for the table number that the teaching operation was

performed is automatically changed to “Absolute”.

•

The result of the teaching becomes effective once the tool operation quits

and the setting data is downloaded to the control unit.

•

This dialog box cannot be closed during the operation.

Содержание FP-XH M8N16PD













































































































































































































































































































































































































































































































































































Результаты поиска

Содержание FP-XH M8N16PD

Отзывы:

Бренды по названию

Популярные бренды

Panasonic FP-XH M8N16PD, Руководство пользователя

Результаты поиска

Содержание FP-XH M8N16PD

Отзывы:

Бренды по названию

Популярные бренды