FAQ
31
To turn off the indicators on front
indication panel.
Please press the buttons for 3 seconds
again to relight the indicators
.
Please press and
buttons at the same time for about 3
seconds during operating to turn off
the indicators.
Why does the clean sign not change or
why is the front panel always opened?
Such problems may occur because of the
difference in sensitivity of sensor. (P.27)
Why is the human activity sensor
indicator always on without people or
pets moving?
Why is the human activity sensor indicator
off?
To disable the human activity sensor.
(Change the sensor sensitivity)
During operation, indicators on front
indication panel are off.
When you use an electric room heater with
swing function, if the indoor temperature
changes, the sensor could automatically
function even if nobody is moving.
The human activity sensor does not
operate within 2 minutes after the power
supply is connected.
The human activity sensor does not take
effect beyond the detectable area or
when it is blocked by furniture.
The human activity sensor may fail to
function when the body temperature is
the same as the ambient temperature.
Is the human activity sensor stained?
Use a dry cotton swab to clean it.
Detects the indoor brightness, and
switches the brightness of indicators
automatically with the “Sleep Mode Auto
Operation” function. (P.28)
When the patrol mode of Econavi
operation is paused, and there is no
people action detected by human activity
sensor, the indicators will be off. (P.28)
The sensitivity of the sensor can be
adjusted.
(The default setting is “Standard
sensitivity”.)
Please release the buttons, when the
sensitivity is set as required.
2
1
Stop operating the product, then press
and buttons at the
same time for about 3 seconds.
(The clean/humidifying indicators
light
on in turn.)
No sensitivity
High sensitivity
Standard sensitivity
Human activity
sensor
因感應器靈敏度差異影響可能出現此現象。
(第
27
頁)
想關閉人體感應器時。(改變感應器靈敏度)
感應器的靈敏度可調節。
產品停止運轉的狀態下,同時按下
和 按鈕約
3
秒。(此時空氣淨化/加濕
指示燈依次亮起。)
(出廠設置為“標準靈敏度”)
標準靈敏度
無靈敏度
高靈敏度
達到所需設置模式時,請鬆開按鈕。
使用擺動功能的電暖氣時,如果室內溫度發生變
化,人即使沒有動也可能會自動感應。
為什麼人或寵物沒有活動,人體感應指示燈一直
點亮?
常見問題解答
空氣污染度指示燈為什麼不發生變化?為什麼
前面板一直是打開狀態?
為什麼人體感應指示燈不亮?
接通電源
2
分鐘內,人體感應器不運轉。
人體感應的感應範圍外,或者有家具等阻擋的
情況下無法感應。
人體溫度與周圍溫度無差異的情況下,有可能
無法感應。
人體感應器是否髒污?
使用干棉棒清理髒污。
人體感應器
通過“睡眠自動運行模式”功能檢測室內亮度並
自動調節指示燈亮度。 (第
28
頁)
運轉過程中,前方指示燈面板上的指示燈為什麼
熄滅了?
想關閉前方指示燈面板上的指示燈時。
想關閉指示燈時,在運轉過程中同時按下
和 按鈕約
3
秒。
當
Econavi
偵測模式運轉停止,人體感應器沒
有檢測到人體活動時,指示燈會熄滅。 (第
28
頁)
再次按下按鈕約
3
秒,指示燈重新亮起。
OTHER
INF
ORMATION
其
他
信
息