FURTHER INFORMATION
28
About Econavi
Patrol mode
“Sleep Mode Auto Operation” can be adjusted. (The default setting is “Sleep Mode Auto 1”.)
Please release the buttons,
when the sensitivity is set as
required.
Stop operating the product, then press and buttons at the same time for about
3 seconds. (The airflow indicators light on in turn.)
1
2
Sleep Mode
Auto 1
Sleep Mode
Auto 2
No Sleep
Mode Auto
Indoor brightness
Control panel
Indicators
Dim
Dark
Front indication panel
Front indication panel
Front indication panel
Control panel
Control panel
Mode
Light low level
Light low level
Light low level
Light low level
Light off
No change
No change
No change
No change
No change
No change
Econavi mode refers to the automatic operation by combining the “patrol mode” in which the prod-
uct detects the dirt in the air in the room every hour with the “learning mode” in which the product
can forecast the dirt generation by mastering the generation time of dirt every day.
Automatically stops operating when the clean air is detected, meanwhile it also operates in advance
to eliminate the dirt effectively before spreading, thus reducing the operation time and saving power.
The product will stop operating automatically after the air is cleaned. After the operation is paused for
55 mins, the product will operate for 5 mins with air volume set to “Med” in the patrol mode.
While the operation is paused and in the patrol mode, if any dirt is
detected, the product will operate with the air volume corresponding
to the dirtiness.
When under the setting of “Full Auto” or “Clean/Humid.”, the prod-
uct will also operate according to the indoor humidity even if the
indoor air is clean.
When the operation is paused, and there is no people in the room,
the front indication will be off. If someone in the room, but there is
no detection for human activity sensor, the front indication also will
be off.
Sleep Mode Auto 1
Sleep Mode Auto 2
No Sleep Mode Auto
Light low level
更多信息
“睡眠自動運轉”模式可設置。(出廠設置為“睡眠自動
1
”)
產品停止運轉的狀態下，同時按下 和 按鈕約
3
秒。(此時指示燈依次亮起。)
達到所需設置模式時，請鬆開按鈕。
睡眠自動
1
睡眠自動
1
睡眠自動
2
睡眠自動
2
無睡眠自動
無睡眠自動
暗
微暗
室內亮度
指示燈
前方指示燈面板
前方指示燈面板
前方指示燈面板
操作面板
操作面板
操作面板
模式
燈微亮
燈微亮
燈微亮
燈微亮
燈微亮
燈熄滅
燈不變
燈不變
燈不變
燈不變
燈不變
燈不變
關於
Econavi
Econavi
是指每小時檢測房間內空氣污染物的“偵測模式”和通過掌握每天污染物產生時間的規律，在污染擴大之前先
行運轉產品的“學習模式”共同組合而成的自動運轉。
檢測到空氣潔淨時，自動停止運轉，同時通過先行運轉，在污染擴大前進行有效清除從而縮短執行時間節省電力。
偵測模式
空氣變潔淨後會自動停止運轉。運轉中止
55
分鐘後，以中速風量運轉
5
分鐘偵測模式。
在“全自動”
、
“加濕空氣淨化”設置情況下，即使室內空氣潔淨，也會根據
室內濕度運轉。
在運轉中止及偵測模式期間，若檢測到污垢時將以最佳的風量進行運轉。
運轉停止時，若室內無人，前方指示燈會熄滅。若室內有人，但人體感應沒有進行檢
測的情況下，前方指示燈也會熄滅。
