30
FAQ
Please confirm the following before you put questions forward or send the product for repair.
Why is the wind cold during humidifying?
When operating in “Humidifying mode” or
“Humidifying auto mode”, the product will
blow out the wind below the room
temperature since the moisture from the
humidifying filter containing water absorbs
the heat in the air.
Why is there dewing on the window and
wall?
Even if the humidity in the room is moderate,
there may be dewing on a cold window or
wall.
Why does the humidity indicator
remain red?
Humidity indicator
The product may not sense the
humidity properly depending on the
setting place.
The indicator is always on.
The room size is too large for the
product?
Refer to the applicable room size.
(P.35)
The indicator is always on.
Please use the humidify sign only as a
reference.
It is different from the display of the
household hygrometer sometimes.
The humidity value will vary with the
temperature.
The humidity may also vary with the
airflow condition.
Why is there no steam during humidifying?
This product is just to make the humidifying
filter containing water generate moisture
when encountering wind but not boil the
water, and hence not generate the steam.
Why is the humidifying amount reduced?
In the rainy season with high humidity or in
the cold weather, the humidifying amount
may change, depending on the room
temperature and humidity, just as the washed
clothes are difficult to dry. The humidifying
amount will increase when the weather is
warm and dry.
Why is a “jee” sound from the emission
outlet?
There is a slight sound when nanoe
®
X is
being generated. Depends on the
environment and operation mode, the sound
may be a bit loud or inaudible but it is not
abnormal.
Why does the color of humidifying
filter change?
The filter may change in color depending
on the water quality. This is not a
performance problem.
Change the setting place.
常見問題解答
諮詢或送去維修之前，請先確認以下情況。
加濕過程中，為什麼風較冷？
“加濕模式”
、
“自動加濕模式”運轉時，
因為濕氣從含水的加濕過濾網散發出來會吸
收空氣中的熱量，所以吹出比室溫低的風。
加濕過程中，為什麼無蒸汽？
此並非使水沸騰的方法，而是採用含水的加濕過濾
網遇風而產生濕氣的方法，因此不會產生蒸汽。
加濕量為什麼較少？
與在梅雨季節濕度較高時以及寒冷的天氣，衣服不
易晾乾原理相同，根據房間的溫度和濕度不同加濕
量會有所變化。溫暖、乾燥的時候加濕量將增多。
窗戶以及牆壁為什麼會結露？
即使房間濕度適中，在溫度較低的窗戶以及
牆壁等上也會發生結露。
出風口為什麼發出“嘰”的聲音？
產生
nanoe
®
X
時，將發出些許聲音。根據使
用環境、運轉模式不同，聲音的大小有所不同，
這並非異常。
加濕過濾網為什麼變色？
根據水質的不同有可能發生變色，並非性能
上的問題。
濕度指示燈為什麼一直顯示為紅色？
濕度指示燈
濕度指示燈 一直亮起。
濕度指示燈 一直亮起。
房間的大小是否過大？
請參考適用面積。(第
35
頁)
改變放置場所。
放置場所不同，存在無法正確感知濕度的
情況。
請將濕度指示作為參考。
有時與家庭用濕度計的顯示值不同。
根據溫度的變化，濕度值會產生變化。
空氣流通情況不同，濕度也會不同。
Notice
提示事項
