12
Human activity sensor (P.10)
It detects human activities and prompts you
through the human activity sensor indicator
(indicator lights on).
The sensor sensitivity is changeable. (P.31)
Clean sign
Check indicator
nanoe
®
X
indicator
Indicates the nanoe
®
X
is generating when the
indicator lights on. nanoe
®
X
will be generated
in all operation modes except you switch off it.
(P.26)
Dirt sensor and Odor sensor
Dirt sensor can detect house dust in air, etc.
Odor senor can detect odor from cigarettes,
etc. The sensor sensitivity is changeable. (P.27)
Light sensor
The product detects the indoor brightness by
the light sensor, and automatically adjusts the
brightness of indicators on control panel and
front indication, and the air volume.When
sleeping, it becomes dark in the room, then the
product will enter the “Sleep Mode Auto
Operation” mode. (P.27~28)
Water fill indicator
Humidity indicator
The displayed humidity is just an approximate
value, which may differ from the value on your
hygrometer.
Low humidity
(The red indicator is on)
High humidity
(The red indicator is on)
Appropriate humidity
(The green indicator is on)
MAIN PARTS IDENTIFICATION
Show the air pollution levels detected by
sensor.
Blue: indicates clean
Purple: indicates slight dirty
Red: indicates dirty
When the water fill indicator blinks or lights on
indicate that you need add water. If you want
to humidify, please add water. (P.15)
After filling water, the water fill indicator is off.
The indicator blinks: The water is used out in
“Humidifying mode”.
The indicator lights on: The water is used out in
“Auto humidifying mode”.
When the check indicator is on (P.34).
(The indicator displays humidity only, humidity
cannot be set.)
主要部件名稱
灰塵感應器和異味感應器
亮度感應器
通過亮度感應器檢測室內亮度，自動調節指示燈的
亮度與風量。就寢時，室內變暗，進入“睡眠自動
運行模式”
。(第
27~28
頁)
人體感應器(第
10
頁)
檢測人的動作，通過指示燈(指示燈亮起)提示。
感應器靈敏度可變。(第
31
頁)
檢查指示燈
空氣污染度指示燈
加水指示燈
nanoe
®
X指示燈
濕度指示燈
藍色：表示乾淨
紫色：表示有點髒
紅色：表示髒
顯示感應器檢測到的空氣污染程度。
灰塵感應器可檢測到室內揚塵等，異味感應器可檢測
到香煙氣味等。
感應器靈敏度可變。(第
27
頁)
濕度低時
(紅燈亮起)
濕度高時
(紅燈亮起)
濕度適當時(綠燈亮起)
(濕度指示燈只是顯示濕度，濕度無法設置。)
顯示當前室內大概的濕度值，可能會與家中濕度計
顯示的數值有差異。
指示燈閃爍或亮起時提示水箱中沒水，需要加濕時，
請加水。(第
15
頁)
加水後，加水指示燈熄滅。
指示燈閃爍：加濕模式時水用完。
指示燈亮起：自動加濕模式時水用完。
檢查指示燈亮起時(第
34
頁)
指示燈亮起表示正在產生
nanoe
®
X
。在所有運轉模式
下都會產生
nanoe
®
X
，除非關閉
nanoe
®
X
功能。
(第
26
頁)
