SETTING AND OPERATING REQUIREMENTS
7
Area that can enhance the effectiveness!
Since dust or pollen is likely to float in the air near the floor,
we recommend you put the product on the flat floor in the room.
Way to circulate air more effectively.
Set the product with its left, right and top about 30 cm or more away from walls, furniture or
curtains, etc., otherwise, the pollutants are difficult to be cleared.
To ensure effectiveness of this product, keep its back at least 1 cm away from the wall.
Do not set the product in the following places.
Where the product will be exposed directly to
sunlight, outlet of air conditioner or heat, etc.
Near equipment such as TV and radio.
→
Keep the product 1 m or above away from such
devices.
Where window or other objects may obstruct
the humidity sensor.
Do not use the same power socket with TV,
radio, etc.
(Otherwise, visual disturbances or noises may
be caused.)
→
In this case, insert the power plug into another
power socket.
If the product is used in the same place for a long period.
When there may be freezing, please empty the tank and tray.
Do not place any object on the product.
(Otherwise, deformation, degeneration,
discolor or malfunction may be occurred.)
(Otherwise, visual disturbances or noises may
be caused.)
(Otherwise, the sensor may not work normally.)
(May be induced with the product’s built-in
magnet, resulting the check indicator lights on,
and the product cannot be operated.)
It may result in dirty surrounding walls or floor. We recommend that you move the product away
from where it is placed when maintaining it.
(If the product operates in the frozen status, malfunction may be caused.)
Do not place obstacles on the product
air inlet and outlet.
(Otherwise it may affect product performance.)
Place it on the floor as a countermeasure against
pollen.
(Otherwise, an operation error or malfunction
may be caused.)
Do not place magnet or metal objects on the
product.
設置與使用要求
在這些場所使用，非常有效！
針對花粉等室內揚塵，將產品放置在地面上。
由於花粉、灰塵等容易落到地板附近，建議將本產品放在房間平坦的地面上。
使房間裡的空氣有效循
环
。
請將本產品設置在其左右與上方距離牆壁、傢俱、窗簾等約
30 cm
以上的地方，否則污染物難以被吸入機體。
為了更有效地使用本產品，請保持產品背部距離牆壁至少
1 cm
。
請勿設置本產品於以下場所。
陽光直射、被空調吹到或受熱等場所。
窗邊等可能擋住濕度感應器的場所。
(否則可能會造成變形、老化、變色或故障。)
電視機及收音機等物體附近。
(否則可能會導致影像絮亂以及雜音。)
(否則可能會導致濕度感應器工作不正常。)
距離
1 m
以上設置。
請勿在產品進風口和出風口處放置障礙物。
(否則可能會影響產品性能。)
請勿與電視機、收音機等設備使用同一電源插座。
(電源插頭插入時有可能會產生影像紊亂以及雜音。)
請將電源插頭插到其他電源插座上。
請勿在產品上放置物品。
請勿在產品上放置磁鐵或金屬物品。
(否則產品可能會誤操作或故障。)
(可能會與產品操作面板內的磁鐵感應，導致檢查指示
燈亮起，產品無法操作。)
在同一場所長時間使用時。
產品周圍的墻壁及地板會有污漬，進行產品維護保養時，建議改變設置場所。
有可能發生凍結時，請倒掉水箱和水盤中的水。
(在結冰狀態下運轉，產品可能會發生故障。)
CONFIRMATION
AND SETUP
確
認
與
設
置
