Chapter 2
Getting Started — Connecting
28 - ENGLISH
Connecting example: Displays (using the method other than DIGITAL LINK
connection)
The following example shows the optional Interface Board for DVI-U 2output (Model No. ET-MCQDV150) attached to
Slot13
and
Slot14
on
the slot section of this device.
HD-SDI INPUT
ST
HD-SDI INPUT
3
1
2
4
3G-SDI INPUT
ST
3G-SDI INPUT
1
2
DVI-U INPUT
STATUS
DVI-U INPUT
DVI-U INPUT
STATUS
DVI-U INPUT
DVI-U SCALED OUTPUT
STATUS
DVI-U SCALED OUTPUT
DVI-U SCALED OUTPUT
STATUS
DVI-U SCALED OUTPUT
DIGITAL
LINK
DIGITAL
LINK
DIGITAL
LINK
DIGITAL
LINK
1
2
3
4
USB
RS232
LAN
DVI - HDMI conversion adaptor
(commercially available)
DVI - HDMI conversion adaptor
(commercially available)
Non-DIGITAL LINK-compatible flat panel
display
Non-DIGITAL LINK-compatible
flat panel display
Non-DIGITAL LINK-compatible projector
Non-DIGITAL LINK-compatible projector
Attention
f
To assure continued performance and FCC compliance, use only high quality DVI-D interface cable with two ferrite cores for connecting with
the <DVI-U SCALED OUTPUT> terminal.
Note
f
The <DVI-U SCALED OUTPUT> terminal can be connected to HDMI and DVI-I-compatible devices. However, images may not appear or
may not be displayed properly on some devices.
f
For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. If a cable that does not conform to HDMI standards
is used, image may be interrupted or may not be displayed.
