Panasonic EASA-PHONE KX-T30810, Руководство по установке

Страница: 71 / 118

To place a call on hold:
Description
PRESS
"HOLD"
··£o.:i,
CONFIRMATION
TONE OF
2
BEEPS WILL
BE HEARD
Extension user can place an intercom call on
hold.
Calls on hold can be released by another
extensions.
Operation
1 .
You are in conversation with an internal
party.
2 .
Press the HOLD button.
The indicator on the ICM button will flash
slowly.
The confirmation tone of
2
beeps will be
heard.
To retrieve at the holding extension,
press the ICM button whose indicator
flashing slowly.
The indicator on the ICM button will be on.
To retrieve from another extension,
dial (5) and then the extension number of the
phone on which the call was placed on hold.
[5] [AB]
'
'
� - - - - -AB=ll
through
I8
•Refer to " Call Park Retrieve" on page 3-1 I .
3-I5
To retrieve:
flat the holding extension
(f/a.,hing)
PRESS
" ICM"
®from another extension
DIAL "5"
DIAL THE HOLDING
EXTENSION
NUMBER
0
When a call is on hold for more than
30
minutes after a hold time reminder is
sounded, the call will be terminated automati­
cally.
A hold time reminder is sounded through the
built-in speaker of the extension.
• Calls on hold will be recalled either after
30 seconds, 1 minute, 1 minute and
30
seconds or
2
minutes, once handset is
�
laced (or the SP-PHONE button is
pressed) .
If hold recall time set is set to "DISA BLE",
will not be recalled.
Refer to "Hold Recall Time Set" on page
2-34.
• The hold time reminder is activated, even if the
hold recall time set is programmed to "DIS­
A BLE".
• When lifting the handset (or be pressing the
SP-PHONE button) :
before recalling . . . the dial tone will b e heard
with the call on hold.
You may dial another
phone number.
while recalling . . . the call on hold will be
released and entered into the
con versation mode.
•An Intercom hold can be activated on one
extension only.