, - - - - - - - - - - - - - - - - - · · · - · · · - · · · · · - · ·
to
assign the same on all 8 extensions
[1 1 ] : .on extension
[1 8]:
o
n
extension
,......................
until
desired
mode
appears
.......
default
all 8
[1 2] [N EXT] [AB]
[MEMORY] [END)
or
[1 2] [N EXT] [N EXT] [SELECT] [MEMORY] [END]
i..
..
.
until the desired extension n umber appears
Description
Conditions
Through programming, you can select which
extensions may be dialed Operator Call.
For to deny all the dialing that start from
"0",
set to DlSAB LE.
When you start the programming from step 1, you
may dial the desired extension number instead of the
NEXT button at step 3.
Programming
1 .
Dial (12) .
"OPERA TOR CALL" will be displayed.
2.
Press the NEXT button.
"ENTER EXT NO " will be displayed.
3.
Press the NEXT button.
"11 : ENA BLE" will be displayed and
"ENA BLE" will blink.
4.
Press the SELECT button, to alternate be
tween ENA BLE and DlSA BLE to select the
desired mode.
5.
Press the MEMORY button.
The blinking L CD will stop.
6.
Repeat steps 3 to 5, to program the assign
ment of the other extensions.
7.
To return to the initial program mode, press
the END button.
2-20
(I) The PREV button allows you to go to the previous
extension for displaying the operator call selection.
• Opef'a:tor call dialing can not deny service class 1
of Toll Restriction.
Example:
• To prohibit operator call on extension
12
[1 2] [N EXT) [ 1 2] [SELECT] [MEMORY] [END]
To
make program change
Exu:nsiom
II
12
Enable
Disable
X
Programming Table
See page 5-15.
13 J.+ 15 16 17 18
