or
to
assign
the
same an
a n
[3]:
until
the
appears
.. . . .. . ..
[20][NEXT][NEXT][SE LECT][MEMORY][END]
:
_ _ _ _ _ _ _
until the desired CO number appears
Description
To detect that an outside party has hung up and
then terminate the outside (after a conversation,
conference etc.) a CPC signal is needed.
CPC signal can be removed or added at
customer's request.
Programming
1 .
Dial (20) .
"CPC DETECTION" will be displayed.
2 .
Press the NEXT button.
"ENTER CO NO" will be displayed.
3.
Press the NEXT button.
"CO 1 : ENA BLE" will be displayed and
"ENABLE" will blink.
4.
Press the SELECT button, to alternate be
tween ENA BLE and DISABLE to select the
desired mode.
5.
Press the MEMORY button ..
The blinking L CD will stop.
2-28
6.
Repeat steps 3 to 5, to program the assign
ment of the other CO's.
7.
To return to the initial program made, press
the END button.
Conditions
ll!l
When you start the programming from step 1 ,
y o u may dial the desired C O number instead
of the NEXT b utton at step 3.
ll!l
T�
PREV button allows you to go to the
previous CO far displaying the calling party
control signal selection.
Programming Table
See page 5-16.
