Description
There are 12 memo1y locations for automatic
dialing available. Up to 32 digits can be stored
into each of the 12 memory locations. Pushing
the
" * ", " # ",
"
-
"
,
"FLASH" or "PA USE"
button counts as
1
digit.
Ill
For your con venience, program private phon
I"
numbers into the KX-T30830, KX-T30820 or
KX- T30850.
Programming
Be sure the handset is in the crad!C' and the
SF-PHONE button is OFF.
1.
Set the MEMOR Y switch to "PROGRA M ' '.
"ONE TO UCH DIA L " will be displayed.
2 .
Press a programmable feature button.
The L CD will show "MOl : NOT STORE D "
when nothing is stored in the programmable
feature button ''01 ''.
When automatic line access number 9 and the
phone number 123-456-7890 has been stored,
"MOl : -123-456-7890" will be displayed.
3 .
Enter the line access number.
9: automatic line access n wnber
81 : line access number of CO
1
82: line access n umber of CO
2
83: line access n umber of CO
3
4.
Enter the phone number.
e
You may r.'nter punctuations during
a
phone number.
The SN R b utton is used as the "- " button.
11!1
To erase a wrong enter, press the CLEA R
button.
The TRA NSFER button is used as the
CLEAR button.
5.
Press the MEMOR'( button .
The MEMOR Y indicator will be lit.
6.
Repeat steps
2
to
5,
to program on other
programmable feature button.
7.
After programming all the n umbers, return
the MEMORY switch to the "SET" position.
The MEMORY indicator will go out.
3-5
Dialing
1.
Lift the handset or press the SP-PHONE
button.
2 .
Press a programmable feature button.
® You may press the CO button to select the
CO line directly after lifting the handset or
pressing the SP-PHONE button.
Conditions
11'!1
To more the 13 digits of a phone number, use
the
" ¢
"
,
or
"
¢ " button
for scrolling
the
display.
Ill
The dialed phone number will be displayed on
the L CD of the KX-T30830.
• Continuous use
of
the programmable fearurr.'
button is possible. (ex. press 01-02)
® The combinations of speed dialing, one-touch
dialing and manual dialing is possible.
1!11
The line access n umber (9, 81 , 82 or 83)
should be stored.
• Continuous use of one touch dialing is possi
ble.
Example:
[01 ] [02]
In this case, programmable feature button
"02 " should not include the line access
number.
® When dialing, the pause is automatically
entered after line access number (9, 81, 82 or
83) .
® Features that can be accessed by using the
f!ta!ing button also can be programmed into
memory.
R efer to "One Touch Access for System
Features" page 3-25.
Examples:
A utomatic line access number 9 and phone
number 123-4567 into the programmable fea
ture "01 " button.
Programming
[Set to " PROGRAM"] [
01
)
[9]
[1 23-4567)
[MEMORY) [Set to
"
SET']
Dialing
[LI FT
HANDSET)
[01 ]
• You may press the CO button to select the CO
line directly after lifting the handset.
