·-
[
to
as
s
ign
same on
extensions
[1 .1 ]:
on xtension
extension
. . . .
[07] [NEXT] [AB] [C
.
. .
E] [MEMORY] [END]
or
[07] [NEXT] [NEXT] [C
. .
.
E] [MEMORY] [END]
�--·· until the desired extension number appears
Description
Through programming, you can select which
extensions may be used for outward dialing by
using the night mode of opration.
Programming
1 .
Dial (07) .
"NIGHT: O UT CO" will be displayed.
2.
Press the NEXT button. '
"ENTER EXT NO. " will be displayed.
prompt entering extension number.
3.
Press the NEXT button.
"11 : CO 1, 2,
3 ''
will be displayed and "1, 2,
3"
will blink.
4.
Dial the CO numbers to be entered.
The desired combination of CO Lines will be
displayed.
[
To prohibit dialing, press the CLEAR button
instead of CO number.
"11 : CO . . . . . " will be displayed.
5.
Press the MEMORY button.
The blinking LCD will stop.
6.
Repeat steps
3
to 5, to program the assign
ment on the other extensions.
7.
To return to the initial program mode, press
the END b utton.
2-14
Conditions
When you start the programming from step 1 ,
you may dial the desired extension number
instead of the NEXT button at step
3.
e
The PREV button allows you to go to the
previous extension for displaying the CO
assignment.
Example: COMPANY XYZ
Company XYZ wants extensions 1 1 , 13 and 1 6
tq.Jlave access to CO 1 , 2 and
3
on outgoing
calls during the night. Extensions 12, 1 4, 15, 1 7
and 1 8 are to be programmed for access to only
CO 1 and
2.
1.
[07] [NEXT] [(NEXT)
or
(1 1 )] [1 ] [2] [3]
[MEMORY]
2.
[NEXT] [1 ] [2] [M EMORY]
3.
[NEXT] [1 ] [2] [3] [MEMORY]
4.
[NEXT] [1] [2] [MEMORY]
5.
[NEXT] [1 ] [2] [MEMORY]
6.
[NEXT] ( 1 ] [2] [3] [M EMORY]
7.
[NEXT] [ 1 ] [2] [M EMORY]
8.
[NEXT] [ 1 ] [2] [MEMORY] [END]
Programming Table
See page 5-14.
