manualshive.com logo in svg

Panasonic DP-8020E, Руководство по обслуживанию

Поделиться
Скачать
Panasonic DP-8020E Скачать руководство пользователя страница 489

Local Firmware Update Tool (Parallel /USB Port) 

 

 

Page 8

 

4.  Using the Local Firmware Update Tool 

 

1 

Set the machine to the Firmware Update Mode and then connect the unit and PC with a Parallel 

cable or USB cable. 

Note:  For the USB Port Models, the Plug & Play of the Printer mode is activated when the 

USB cable is connected without the unit set in the USB Firmware Update Mode. If 

this happens, please click the [Cancel] button for the Plug and Play Driver 

installation. 

2 

Please close the all applications that are 

currently running. 

Also ensure that the 

Status Monitor

 and/or 

Port Controller

 are 

closed

. If they are 

running, right click on the icons in the system 

tray and select Exit/End. 

Note: 

About Windows 2000/XP, using 

Network Firmware Update Tool, the 

authority more than a Power User is 

required. 

 

 

 

 

 

3 

From the Windows Desktop, double-click on 

the 

Local Firmware Update Tool

 shortcut 

icon to start the Panasonic Firmware 

Programming Wizard. 
Click [

Next>

]. 

 

Note:

  Please close all applications that are 

currently running. 

Also ensure that the Status Monitor 

and/or Port Controller are 

closed

. If 

they are running, right click on the icons 

in the system tray and select Exit/End.

 

4 

Select the Firmware Update Driver USB or 

Parallel. 
Click [

Next>

]. 

 

Note:

  The “Firmware Update Driver (USB)” is 

only displayed if you installed it with the 

unit Plug and Play. 

 

Port Controller

Status Monitor 

Содержание DP-8020E



















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды