manualshive.com logo in svg

Panasonic DP-8020E, Руководство по обслуживанию

Поделиться
Скачать
Panasonic DP-8020E Скачать руководство пользователя страница 317

317

SEP 2006

 Ver. 1.0

DP-8020E/8020P/8016P

b. The developer is mixed by the Toner Screws. The toner becomes negatively charged ( ñ ) and the 

carrier becomes positively charged ( + ). The developer is magnetically attracted to the aluminum 
sleeve of the Magnetic Roller, and the magnetic brush is formed.

c. The Magnetic Roller sleeve rotates in a counterclockwise direction. The height of magnetic brush is 

controlled by the gap between the doctor blade and the sleeve surface.

d. The drum, with an electrostatic latent image, is rotated clockwise and makes contact with the 

magnetic brush.

e. The negatively charged toner is attracted to the electrostatic latent image on the drum.

f. Charge (developer bias) is applied to the Magnetic Roller sleeve, which prevents toner from moving 

to the non-image area of the drum. The distance between the drum and the sleeve is controlled by 
the drum spacers.

Содержание DP-8020E



















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды