manualshive.com logo in svg

Panasonic DP-8020E, Руководство по обслуживанию

Поделиться
Скачать
Panasonic DP-8020E Скачать руководство пользователя страница 456

456

SEP 2006

Ver. 1.0

DP-8020E/8020P/8016P

9.13. Message Disposition Notifications (MDN) - Extended Feature

The confirmation of delivery and processing are extensions to "Simple Mode of Facsimile Using Internet 
Mail" [RFC2305]. These are designed to be interoperable with the existing base of mail transfer agents 
(MTAs) and mail user agents (MUAs), and take advantage of existing standards for advanced functionality 
such as positive delivery confirmation and disposition notification. The following two features are combined.

(1) Delivery confirmation (required)
(2) Additional document features (optional)

In Internet Mail, the operations of Delivery (to the mailbox) and Disposition (to paper or a screen) may be 
separated in time (due to store and forwarding of messages) and location (due to separation of delivery 
agent (MTA) and user agent (MUA)). The confirmations of these two operations are supplied by two 
different standards-track mechanisms: Delivery Status Notifications (DSN) [RFC1891, RFC1894] and 
Message Disposition Notifications (MDN) [RFC2298], respectively.
Your Panasonic device supports MDN.

Delivery Status Notification (DSN)

A DSN can be used to notify the sender of a message of any of several conditions: failed delivery, delayed 
delivery, successful delivery, or the gatewaying of a message into an environment that may not support 
DSNs. Panasonic Internet FAX does not request DSN while sending.

Message Disposition Notifications (MDN)

A MDN can be used to notify the sender of a message of any of several conditions that may occur after 
successful delivery, such as display of the message contents, printing of the message, deletion (without 
display) of the message, or the recipient's refusal to provide MDNs.

The MDNs are expected to serve several purposes such as allow mail user agents (Outlook Express) to 
keep track of the disposition of messages sent, by associating returned MDNs with earlier message 
transmissions.

SMTP Server

SMTP Server

DSN

N returned to sender by Reporting MTAs (Message Transfer Agent) if fail of delivery is occurre

fail

SMTP Server

SMTP Server

MDN

Recipient notifies that the message contents have been displayed 

Содержание DP-8020E



















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды