Panasonic DP-8020E Скачать руководство пользователя страница 326

Страница: 326 / 498

326

SEP 2006

Ver. 1.0

DP-8020E/8020P/8016P

7.3.2. Setting the Default Destination (For Europe and Other Destinations only)

1. Press "

" or "

" arrow keys to select the desired destination.

2. Press the "

Set

" key.

3. Press the "

" key for YES.

After the machine has warmed up, it displays:

4. Turn the Power Switch on the Right side of the machine to the

OFF

, and back to the

position.

(31) Plug the

AC Power Cord

, and turn the Power

Switch on the Right Side of the machine to the
ON position.

Note:

Perform the following adjustments after the
machine has warmed up, and displays:

<For USA / Canada etc> (Skip to Sect. 7.3.3.)

<For Europe and Other Destinations only>

Note:

The contents in the (**) *** in the LCD display
above may differ depending on the destination.

READY TO COPY

COPIES:001

DP-8020E (**) ***

DESTINATION CODE :
PRESS \/ /\ TO SELECT

READY TO COPY

COPIES:001

Содержание DP-8020E



















































































































































































































































































































































































































































































































Результаты поиска

Содержание DP-8020E

Отзывы:

Бренды по названию

Популярные бренды

Panasonic DP-8020E, Руководство по обслуживанию

Результаты поиска

Содержание DP-8020E

Отзывы:

Бренды по названию

Популярные бренды